How to solve Slitherlink
Slitherlink is a square of dots with a number from 0 to 3 in some of the cells between them. The puzzle is to join neighbouring dots with short lines into one closed loop, never crossing or branching, so that every number has exactly that many of its cell’s sides on the loop.
Nothing here is a hint: the board never checks you against the answer, and none of the moves below needs it to. These five techniques are the whole ladder the boards are graded on, simplest first, each drawn on a small board.
How to play
Draw lines between neighbouring dots to make a single closed loop.
The loop never crosses itself or branches: every dot has two lines or none.
A number says how many of its cell’s four sides the loop runs along; a cell without a number may have any.
Crosses are your own notes of where a line cannot go; only the lines are the answer.
Tap between two dots to draw a line, tap again for a cross, once more to clear it. Drag from dot to dot to draw several lines at once; a drag that starts on a line takes lines away, and no drag draws over a cross.
Two fingers zoom and move the board; while it is zoomed, a little map beside Undo moves it too. One finger always draws.
With a mouse, the right button puts a cross down or lifts it, and dragging with it crosses several edges. The arrow keys walk the dots; Shift with an arrow draws that way, Alt (Option) with an arrow crosses it.
A number turns red when its cell has too many lines and grey when it has just enough. A dot turns red where the lines branch, and once every number adds up, where a line ends loose.
Every board has exactly one loop that fits its numbers, and it can be reached without a single guess. The gap between two neighbouring dots — called an edge from here on — holds a line, a cross or nothing, and two facts from the rules carry most of what follows. A dot has two lines or none, so a line that reaches a dot always goes on from it, and a dot with no line and a single open edge can take no line at all. And a number counts sides: a 0 has the loop along none of its sides, a 3 along all but one.
Counting
The gap between two neighbouring dots is an edge, and an edge with neither a line nor a cross is open. Five moves need nothing but counting, and every board leans on them from the first look to the last:
- A number whose lines are all drawn: its other sides are crossed.
- A number with exactly as many open sides as it still needs: all of them are lines.
- A dot with two lines: its other edges are crossed.
- A dot with one line and one open edge: the line carries on along it.
- A dot with no line and a single open edge: that edge is crossed, since a loop that came in there could never leave.
Each move opens the way for the next, and this board falls to them alone — though no board in the game does: each needs at least the next chapter as well.
A number and its corners
When counting stalls, look at a single number together with the four dots at its corners. Each of those dots must have two lines or none, so of all the ways the number’s open sides could be drawn, some would leave a dot with a loose end or a branch; only the others can be the loop, and whatever they all agree on is settled. A few shapes come up again and again: a 3 in a corner of the board, a 1 in a corner, a line arriving at a number’s corner from outside, and a corner with nowhere to go but the number’s own two sides. Every 7 × 7 needs this.
The loop must not close early
There is only one loop, so no part of it may close on itself while other lines are still waiting to join it. When the two loose ends of one stretch of line lie a single edge apart, that edge is crossed: a line there would close a small loop of its own and leave the other lines stranded. It is easy to miss, because no single number forbids that edge — only the board as a whole does. The 10 × 10 is where it starts to come up.
Two numbers read together
Some conclusions need two numbers at once: neither says enough on its own, but together, with the sides and the dots they share, they leave the loop only a few ways past them. Two 3s that touch corner to corner: each has exactly one line at the dot they share, so the two sides of each away from it are lines. Two 3s side by side: the far side of each is a line, and so is the side between them, since leaving it out would close a loop round those two cells alone. Other pairs work the same way: lay out every way both could be drawn together and keep what they agree on. Every 10 × 10 needs this.
Inside and outside
A closed loop splits the board in two: every cell is either inside it or outside, and whatever lies beyond the edge of the board is outside. Step over a line and you change sides; step over a cross and you stay where you were. So cells joined by crosses are on the same side, a line between two cells puts them on different sides, and a number says how many of its four neighbours lie on the other side from it. Once two cells are known to be on the same side, the edge between them is a cross; on different sides, a line. This reaches across the board as no look at a single spot can, and every 12 × 12 needs it. In the pictures below, shaded cells are inside the loop and a ringed cell is outside.
No timer. Leave and come back — it’s saved.
Play today’s Slitherlink